Electric Flight in Australia


Pulsar 2.0 PRO electric glider

How to Order

 Peter Pine

1/40 Kellehers Road
Pottsville Beach 2489
Phone (02) 6676 1437
Mobile: (0407) 732 440

E-mail: ppine@northnet.com.au

Back to Kits Main Page
This is a lightweight electric glider with ailerons and FLAPS. This is what is needed for those accurate landings required in F5J Glider competitions.

The Pulsar 2.0 PRO - the new, resdesigned PRO version that replaces the Pulsar 2008- is made in the Ukraine by free flight modellers who know how to build strong and light. The total weight of this kit is 320g. That's right, only 320g!! And that's for a 2.0m glider!

The wing is a three-piece unit of carbon construction with balsa ribs capped with carbon strip, and already covered in Oracover Lite. The leading edge is all carbon weave cloth back to the spar. The trailing edge is a thin strip of carbon. The joiners are carbon rods. The wing section is an AG5 modified - thin (fast climb) and slightly undercambered (great glide). The wing is mounted on a fuselage pylon to allow a single flap in the centre panel of the wing, operated by one servo.

The fuselage pod is made from Kevlar and matches the wing in colour. There is a removable hatch to access the battery and ESC. The fibreglass nose former is already fitted and strengthened. The tail boom is a rolled carbon tube.

The tailplane and fin bolt on (bolts supplied). Other accessories include control horns and carbon fairings for aileron and flap servos. The Pulsar 2.0 PRO can pack flat in a box for transport or storage.

Controls are ailerons (two servos), flaps (one servo), elevator and rudder. Sub-micro servos like the Dymond D60 or the Dymond 47 are recommended. A new possibility is the KST range of metal-geared, metal-case compact servos: KST-DSX08, KST-DSX08H or KST-DS08XH-2

Use a Hyperion G5 pack (850, 900 or 1100 mAh packs) for a battery. A 2S pack may be used for gentler flying. For a motor, use the Mega 1615/05 inner-runner without any spinning can to worry about. These small diameter motors are necessary because of the thin nose of the Pulsar 2.0 PRO.

Wingspan - 1990mm
Wing section - AG 25 modified
Kit weight - 320g

Weight complete - 600-800g
Motor - Mega 1615/05
Battery - 2-3S
Price - $1095

The drawing below is the new Pulsar 2.0 PRO version that has the tailplane and fin mounted by two bolts.

A Pulsar 2.5 PRO is also available!

I am an agent for all Star flight kits made in Russia. See the Star Flight web site for all the possibilities - click this link.

Click here for covering to match the Pulsar 2.0 PRO - for repairs or recovering.