Electric Flight in Australia

 

Hyperion G6 High Voltage LiPo Packs - 3.8V per cell - discontinued

Home
Answers
Set-ups
Products
News
History
 
 
 
 
 
 
 
 
Peter Pine
PO Box 324
Pottsville Beach NSW 2489
Phone (02) 6676 1437
Mobile (0407) 732 440
E-mail: ppine@northnet.com.au 
 
  
 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Back to LiPo Main Page
 
 
The LiPo scenario is changing - HV (high voltage packs) are coming on to the scene and will eventually replace standard LiPo packs. For the time being, Hyperion are producing a small range of standard 3.7V per cell LiPo packs for those who remain wedded to the older style - click here to see them.

These packs come with a balancing plug that is compatible with the Hyperion range of chargers with built-in balancers, but the standard is changing to XH balance plugs (at last common sense prevails and one style of balance plug is being adopted). Also, these packs come with a power plug fitted, but the XT60 plugs have been adopted - fine if you already use these. If you use Deans you can change the plug, or make up a Deans-XT60 adapter to use in your aircraft and for charging.

These packs are smaller and lighter than most, and have more capaicty built in to the same size - for example, the 1400-3S is the same size and weight as previous 1300-3S. They present as a compelling range of LiPo batteries. In the chart below, the number in the cell type column indicates the mAh capacity of the pack. The Series column indicates 2S (7.6V), 3S (11.4V), 4S (15.2V), 5S (19V), 6S (22.8), 7S (26.6V).

Click here to see the Battery Sentry - a device to help you manage your LiPo packs and keep them healthy!

Please note - LG325, 335 and 345 packs have been replaced by a smaller range of G5 packs, and the HV packs below are becoming the norm.

Note: G6 now replaced by G7 new technology - progress is relentless!

Check Specials page for G6 packs left at half price!

Packs are 60C or 80C maximum and take a maximum charge of 4.35V per cell
Please note - 60C packs are 30C continous, 60C for 10 seconds
80C packs are 40C continuous, 80C for 10 seconds

New technology gives longer life and consistent performance - and 10% more capacity!
To gain the maximum capacity, you must charge these packs using HV settings! Some Hyperion chargers can have the firmware upgraded to include HV settings (never charge standard LiPos on these settings), and click here to see some HV chargers available.

You can charge these packs on a standard LiPo setting and they will work, but you will not gain the maximum rated capacity out of them - for example, charge a 1400-3S-HV pack on standard settings and you will only gain 1250-1300 mAh out of that pack.

Packs with price indicated are in stock

Cell capacity mAh
Series
Volts
C Rating
Wire length mm
Wire guage
Connector
Dimensions
Weight
Price
900
3S
11.4
60
75
18
XT-60
74 x 25.5 x 18mm
70g
$29
1200
3S
11.4
60
75
18
XT-60
68 x 33.5 x 19.5mm
89g
$32.50
1400
3S
11.4
60
75
16
XT-60
68 x 33.5 x 21.5mm
100g
$35
1400
3S
11.4
80
60
14
XT-60
70 x 33.5 x 23mm
108g
$39.50
1800
3S
11.4
60
75
14
XT-60
88 x 33.5 x 21mm
128g
2400
3S
11.4
60
75
14
XT-60
104 x 33.5 x 21.5mm
156g
$55
2400
4S
15.2
60
75
14
XT-60
104 x 33.5 x 28.5mm
203g
$69
3650
3S
11.4
60
120
12
none
135 x 42 x 21mm
245g
$74
3650
3S
11.4
80
120
12
none
135 x 42 x 21mm
248g
$89
3650
4S
15.2
60
120
12
none
135 x 42 x 28mm
320g
$98
3650
4S
15.2
80
120
10
none
135 x 42 x 37mm
326g
$129