Electric Flight in Australia


Scorpion 3032-10 outrunner motor

How to Order

 Peter Pine

PO Box 324
Pottsville Beach 2489
Phone (02) 6676 1437
Fax (02) 6676 2831

E-mail: ppine@northnet.com.au

Back to Scorpion Motors Page
Motor Specifications
Io = 2.61A at 10V
Kv = 823 rpm/volt
R = 0.029 Ohms
Length = 49.9mm
Diameter = 37.5mm
Weight = 223g
Continuous current accepted = 80A
Maximum continuous power = 1200W
Shaft = 5mm carbonised steel (protrudes both ends)
Collet-type prop adaptor and back-mount supplied

Motor fixing = four 3mm bolts supplied
Male bullet connectors fitted to motor
Female bullet connectors supplied
An LRK (outrunner) brushless motor for R/C aircraft up to 5.0 kg powered by 10-16 cells or 3-5S LiPo; suitable for cabin models, scale models, aerobatic models and gliders - this motor can easily replace .60 two-stroke engines or .90 four stroke engines. No gearbox is required because of the high torque of this motor type.

All Scorpion 3032 motors have the normal 3 ball bearings to support the rotating housing, and an extra ring bearing to support the back end of the rotor - this prevents any flexing under load - maintains the air gap between the stator and magnets under all operating conditions.

This is one gutsy motor - capable of high amps and great power output up to 1200W!

The S30 series of motors from Scorpion all have 30mm diameter stators - there are 12 stator arms and 14 magnets in the rotor housing. The stator is 32mm long in this 3032 version. The motor wind is a 10 turn delta wind with 24 strand 0.21mm wire.

Prop for 3S - 15x10"
Prop for 4S - 14x7"
Prop for 5S - 11x8"

Motor guaranteed for two years

No longer available

Some power recommendations
Prop Prop type Volts Cells Revs per minute Amps Watts In Thrust Grams Recommended controller
Motors that compare to the Scorpion 3032-10:
Dualsky XM4260CA-4, 840 KV
HXT 42-50A, 700 KV
Rimfire 42-60-800

Watch for prop data on this new motor - coming soon!