Io = 3.26A at 10V
Kv = 1190 rpm/volt
R = 0.008 Ohms
Length = 51.7mm
Diameter = 37.5mm
Weight = 205g
Continuous current accepted = 80A
Maximum continuous power = 1050W
Shaft = 5mm carbonised steel (protrudes both ends)
Collet-type prop adaptor and back-mount supplied
Motor fixing = four 3mm bolts supplied
Male bullet connectors fitted to motor
Female bullet connectors supplied
Recommended controller = Hifei ESC
|An LRK (outrunner) brushless motor for R/C aircraft up to 3.5 kg powered by 7-12 cells or 2-4S LiPo; suitable for cabin models, scale models, aerobatic models and gliders - this is quite a hot motor and would work well in competition gliders - it is a suitable competitor for the Hyperion 3025-6 competition motor - use the 110A speed controller if you are going to push this motor. No gearbox is required because of the high torque of this motor type.
All Scorpion 30mm motors have 3 ball bearings to support the rotating housing.
The S30 series of motors from Scorpion all have 30mm diameter stators - there are 12 stator arms and 14 magnets in the rotor housing. The stator is 26mm long in this 3026 version. The motor wind is a 5 turn delta wind with 26 strand 0.25mm wire.
Prop for 2S - 14x10"
Motor guaranteed for two years
Price = $189 in stock now
|Motors that compare to the Scorpion 3026-1190:
Axi 2826/16, 1130 KV
Hacker A30-8XL, 1100 KV
Hyperion Z3025-6, 1255 KV
HXT 35-48A, 1100 KV
Venom V35XL, 1100 KV
* Please note that the propeller recommendations given here relate to the Series 1 version, but can be used as a guide for the Series 2 - generally the Series 2 motor is slightly more efficient so the amps draw may be lower, but the power output may be slightly higher.