Electric Flight in Australia

 

MVVS 8.0/950 Outrunner electric motor

Home
Answers
Set-ups
Products
News
History
How to Order
 
 
 
 
  

 Peter Pine

PO Box 324
Pottsville Beach 2489
Phone (02) 6676 1437
Fax (02) 6676 2831

E-mail: ppine@northnet.com.au

 
 
 
 
 
 
  
Back to MVVS Motors
Motor Specifications
Kv = 950 rpm/volt
Stator diameter = 36mm
Stator lemgth = 20mm
Length = 47mm
Outside Diameter = 44mm
Weight = 216g
Continuous current accepted = 35-45A

Maximum load = 55A for 60 seconds
Shaft = 5mm carbonised steel

Motor fixing = four 3mm bolts
Recommended controller 4-5S = Hifei 80A SBEC or Hyperion 90A SB
An outrunner brushless motor for R/C aircraft up to 3.5 kg powered by 10-18 cells or 3-6S LiPo; suitable for trainers, aerobatic models and fun fliers. No gearbox is required because of the high torque of this motor type. A prop adapter and rear mount are supplied with this motor.

This 8.0 series of motor from MVVS has 36mm diameter stators - there are 16 poles or magnets.

Prop for 3S - 14x8"
Prop for 4S - 13x8"
Prop for 5S - 12x8"

Price = $229

Model Type
Max. Weight
No. Cells
Recomm. Prop
Amps
Recomm. ESC
3D Acrobat
2.2kg
4
15x8"
Hifei 80A SBEC
Dynamic Acrobat
3.0kg
4
12x8"
Hifei 80A SBEC
Trainer
3.5kg
4
11x7"
Hifei 80A SBEC
Slow model
3.5kg
3
14x8"
Hifei 80A SBEC
Please note - only use a BEC controller if you have 2 or 3 servos - for more servos, go to an SBEC controller that will handle up to 6 servos.

Click here to see a range of bolts for securing your motor in your aircraft.