Electric Flight in Australia

 

MVVS 3.5/1200 outrunner in a case

Home
Answers
Set-ups
Products
News
History
How to Order
 
 
 
 
  

 Peter Pine

PO Box 324
Pottsville Beach 2489
Phone (02) 6676 1437
Mobile (0407) 732 440

E-mail: ppine@northnet.com.au

 
 
 
 
 
 
 
  
Back to MVVS Motors
Motor Specifications
Kv = 1200 rpm/volt
Stator diameter = 26mm
Stator length = 18mm
Motor Length = 46.5mm
Outside Diameter = 37.8mm
Weight = 168g
Continuous current accepted = 25-37A

Maximum load = 45A for 30 seconds
Shaft = 5mm carbonised steel

Motor fixing = four 3mm bolts
Male bullet connectors fitted to rear of motor
Female bullets for ESC supplied
Recommended controller 2-4S = Hefei 65A or Hyperion 60A
An outrunner brushless motor in a case for R/C aircraft up to 2.0 kg powered by 7-12 cells or 2-4S LiPo; suitable for cabin models, scale models, aerobatic models and gliders. No gearbox is required because of the high torque of this motor type. Unlike the sports version of the 3.5/1200, this motor does not have an integral fan but is suitable for applications where it is not being pushed to the limits It is lighter than the 3.5/1200 SPORT and the cost is lower.

The 3.5 series of motors from MVVS all have 26mm diameter stators - there are 12 poles or magnets.

Prop for 3S - 8x6" to 11x8"
Prop for 4S - 8x6"to 9x6"

Price = $189

Model Type
Max. Weight
No. Cells
Recomm. Prop
Amps
Recomm. ESC
Glider up to 2m
1.6kg
3
11x7"
39A
Hifei 60A SBEC
Dynamic Glider
1.4kg
3
11x8"
40A
Hifei 60A SBEC
Acrobat
1.4kg
3
11x7"
39A
Hifei 60A SBEC
Quick model
1.4kg
4
8x6"
33A
Hifei 45A SBEC
Fun Fly
1.2kg
3
12x6"
35A
Hifei 40A BEC
Slow model
2.0kg
3
10.5x6"
28A
Hifei 40A BEC
Click here to see a range of bolts for securing your motor in your aircraft.