Electric Flight in Australia

 

MVVS 2.5/1120 outrunner in a case

Home
Answers
Set-ups
Products
News
History
How to Order
 
 
 
 
  

 Peter Pine

PO Box 324
Pottsville Beach 2489
Phone (02) 6676 1437
Fax (02) 6676 2831

E-mail: ppine@northnet.com.au

 
 
 
 
 
 
 
 
 
  
Back to MVVS Motors
Motor Specifications
Kv = 1120 rpm/volt
Stator diameter = 26mm
Stator length = 9mm
Motor Length = 36.5mm
Outside Diameter = 37.8mm
Weight = 109g
Continuous current accepted = 10-20A

Maximum load = 25A for 30 seconds
Shaft = 4mm carbonised steel

Motor fixing = four 3mm bolts
Male bullet connectors fitted to rear of motor
Female bullets for ESC supplied
Recommended controller 2-4S = Hefei 30A or Hyperion 30A
An outrunner brushless motor in a case for R/C aircraft up to 1.6 kg powered by 7-12 cells or 3-4S LiPo; suitable for cabin models, scale models, aerobatic models and gliders. No gearbox is required because of the high torque of this motor type.

The 2.5 series of motors from MVVS all have 26mm diameter stators - there are 12 poles or magnets.


Prop for 3S - 10x7"
Prop for 4S - 9x5""

Price = $145

Model Type
Max. Weight
No. Cells
Recomm. Prop
Amps
Recomm. ESC
Glider
1.6kg
3
10x7"
Hifei 30A BEC
Acrobat
1.0kg
4
9.5x6"
Hifei 40A BEC
Mini-hotliner
1.0kg
4
9.5x5"
Hifei 40A BEC
Fun Fly
0.85kg
4
9x4.5"
Hifei 40A BEC
Training model
1.6kg
3
10x7"
Hifei 30A BEC
Twin engine model
2.5kg
3
9.5x7"
Hifei 30A BEC
Please note - only use a BEC controller if you have 2 or 3 servos - for more servos, go to an SBEC controller that will handle up to 6 servos.
Click here to see a range of bolts for securing your motor in your aircraft.