Electric Flight in Australia


LT 200 Flex glider

How to Order

 Peter Pine

1/40 Kellehers Road
Pottsville Beach 2489
Phone (02) 6676 1437
Mobile: (0407) 732 440

E-mail: ppine@northnet.com.au

Back to Kits Main Page
Are you looking for a model about 2 metres wingspan that can be modelled in any configuration desired? If you are, this is the one.

The LT 200 Flex can take any direction you desire - either a straight glider for flat field or slope, electric glider with minimal controls, or a full house glider with flaps and all! That is why it is called the Flex.

You make this model up yourself out of laser cut parts. It is all timber; even the flying surfaces are covered in timber, so you do not need to use covering if that is what you want. The boom, of course, is carbon fibre.

The wing section is styled for slow flight, especially conducive to working thermals. This would be an ideal model for RES events, or even the Millennium Cup. And all this comes with a modest price tag.
Wingspan - 1920mmmm
Length - 1120mm
Weight - about 850g
Recommended brushless outrunner motor - Scorpion 2212-1070 outrunner with 10x5" prop
Recommended inner-runner motor - Mega 1615/7 with an 8x5" prop (no spinning rear can to worry about)
Recommended ourunner with a front extension housing - Dualsky XM-2838EG with an 8x6" prop

Recommended speed controller - Hifei 40A standard BEC for 2 controls, 45A SBEC for more than two controls

Recommended servos - Dymond D60

Kit Price - $199