Electric Flight in Australia


KST DS X10 Mini wing servo

How to Order

 Peter Pine

1/40 Kellehers Road
Pottsville Beach 2489
Phone (02) 6676 1437
Fax (02) 6676 2831

E-mail: ppine@northnet.com.au


Back to Servos Main Page
for DS135MG
See timber mounting frame below
KST Servos are the latest in thin, metal case, metal geared servos. They are being hailed around the world as good quality servos. If you need a thin servo for wing mounting or side mounting with lots of grunt, this is the one for you; highly recommended for flaps and elevator. They have loads of power, but have the advantage of moderate weight, solid construction, twin ball bearings, metal gears, lower price, and only 10mm thick. Try some today!!

This model replaces the DS-135MG - more power and other improvements
• now with coreless motor
• now high voltage up to 8.4V

The specifications for the DS X10 Mini MG are:
  • Size: 30 x 29.6 x 10mm
  • Weight: 23g
  • Torque: 5.5 kg/cm on 6.0V
  • Torque: 6.8 kg/cm on 7.4V
  • Speed: 0.13 seconds to 60 degrees on 6.0V
  • Speed: 0.11 seconds to 60 degrees on 7.4V
  • Operating voltage: 4.8 - 8.4V
    Twin ball bearing
  • Price: $79.00
MKS timber mounting frame (unchanged) fits this servo perfectly - secure servo with short screws, add tape to the bottom of the servo and glue the frame in to your wing.

Pack of two timber frames: $18