Electric Flight in Australia


KST DS135MG wing servo

How to Order

 Peter Pine

PO Box 324
Pottsville Beach 2489
Phone (02) 6676 1437
Fax (02) 6676 2831

E-mail: ppine@northnet.com.au


Back to Servos Main Page
See timber mounting frame below
KST Servos are the latest in thin, metal case, metal geared servos. They are being hailed around the world as good quality servos. If you need a thin servo for wing mounting or side mounting with lots of grunt, this is the one for you; highly recommended for flaps and elevator. They have loads of power, but have the advantage of moderate weight, solid construction, twin ball bearings, metal gears, lower price, and only 10mm thick. Try some today!!

The specifications for the DS 135 MG are:
  • Size: 30 x 30 x 10mm
  • Weight: 23g
  • Torque: 4.3 kg/cm on 4.8V
  • Torque: 5.2 kg/cm on 6.0V
  • Speed: 0.15 seconds to 60 degrees on 4.8V
  • Speed: 0.12 seconds to 60 degrees on 6.0V
  • Operating voltage: 4.8 - 6.0V
  • Price: $45.00
MKS timber mounting frame fits this servo perfectly - secure servo with short screws, add tape to the bottom of the servo and glue the frame in to your wing.

Pack of two timber frames: $18