Electric Flight in Australia

 

Dualsky XM 3036EG-11

Home
Answers
Set-ups
Products
News
History
How to Order
 
  

 Peter Pine

1/40 Kellehers Road
Pottsville Beach 2489
Phone (02) 6676 1437
Mobile (0407) 732 440

E-mail: ppine@northnet.com.au

 
 
 
 
 
  
Back to Motors Main Page
Motor Specifications
Kv = 1370 rpm/volt
Motor Length = 36.9mm
Outside Diam.= 31mm (front face 26mm)
Weight = 89g
Max efficiency current = 16A

Maximum load = 31A for 15 seconds
Maximum Power = 372W
Timing = 15 degrees, medium
Shaft = 4mm carbonised steel

Motor fixing = four 3mm bolts
Bulletst supplied
Recommended controller 3S = Hifei 40A for two servos, Hifei 45A for more servos
An outrunner brushless motor in a case for gliders from Dualsky - cable for ESC comes out the back and no spinning can to worry about. The 5mm shaft is hollow and strong. Capable of flying models up to 1.6 kg powered by 3S LiPo . No gearbox is required because of the high torque of this motor type.

Note that this motor has been designed especially for narrow fuselage aircraft up to 3.5m - capable of 372W for 15 seconds. You can use larger props for short runs in models up to 3.5m wingspan.

Prop for 3S - 9x6", 10x6", 10x8"


Price = $125

Please note - only use a BEC controller in R/C aircraft if you have 2 or 3 servos - for more servos, go to an SBEC controller that will handle up to 6 servos.

Click here to see a range of bolts for securing your motor in your aircraft.