Electric Flight in Australia

 

AXI 2826/12 Cyclone outrunner in a case

Home
Answers
Set-ups
Products
News
History
How to Order
 
 
  

 Peter Pine

PO Box 324
Pottsville Beach 2489
Phone (02) 6676 1437
Mobile (0407) 732 440

E-mail: ppine@northnet.com.au

 
 
 
 
 
 
 
 
 
  
Back to AXI Motors
Motor Specifications
Kv = 760 rpm/volt
Stator diameter = 28mm
Stator length = 26mm
Motor Length = 75mm
Outside Diameter = 40mm
Weight = 230g
Continuous current accepted = 25A

Maximum load = 40A for 60 seconds
Maximum Power = 665W
Shaft = 5mm carbonised steel

Motor fixing = four 3mm bolts
Male bullet connectors fitted to rear of motor
Female bullets for ESC supplied
Recommended controller 3S = Hefei 60A
Image is generic - length of case varies
An outrunner brushless motor in a case for R/C aircraft up to 3.0 kg powered by 3S or 4S LiPo; suitable for cabin models, scale models, aerobatic models and gliders. No gearbox is required because of the high torque of this motor type.

The Cyclone series of motors from AXI all have 28mm diameter stators - there are 12 poles or magnets.


Prop for 3S - 14x7"
Prop for 4S - 12x6.5"

Price = $239

Model Type
Max. Weight
No. Cells
Recomm. Prop
Amps
Recomm. ESC
Glider
2.6kg
3
14x7"
37A
Hifei 60A SBEC
Glider
3.0kg
4
12x6.5"
37A
Hifei 60A SBEC
Please note - only use a BEC controller if you have 2 or 3 servos - for more servos, go to an SBEC controller that will handle up to 6 servos.

Click here to see a range of bolts for securing your motor in your aircraft.