Electric Flight in Australia

 

AXI 2814/20 Cyclone outrunner in a case

Home
Answers
Set-ups
Products
News
History
How to Order
 
 
  

 Peter Pine

PO Box 324
Pottsville Beach 2489
Phone (02) 6676 1437
Mobile (0407) 732 440

E-mail: ppine@northnet.com.au

 
 
 
 
 
 
 
 
 
  
Back to AXI Motors
Motor Specifications
Kv = 840 rpm/volt
Stator diameter = 28mm
Stator length = 14mm
Motor Length = 63mm
Outside Diameter = 40mm
Weight = 164g
Continuous current accepted = 17A

Maximum load = 28A for 60 seconds
Maximum Power = 365W
Shaft = 5mm carbonised steel

Motor fixing = four 3mm bolts
Male bullet connectors fitted to rear of motor
Female bullets for ESC supplied
Recommended controller 3S = Hefei 40A or 45A
Image is generic - length of case varies
An outrunner brushless motor in a case for R/C aircraft up to 1.9 kg powered by 2S or 3S LiPo; suitable for cabin models, scale models, aerobatic models and gliders. No gearbox is required because of the high torque of this motor type.

The Cyclone series of motors from AXI all have 28mm diameter stators - there are 12 poles or magnets.


Prop for 2S - 13x8"
Prop for 3S - 12x6.5"

Price = $185

Model Type
Max. Weight
No. Cells
Recomm. Prop
Amps
Recomm. ESC
Glider
1.5kg
2
13x8"
26A
Hifei 40A BEC
Glider
1.9kg
3
12x6.5"
26A
Hifei 45A SBEC
Please note - only use a BEC controller if you have 2 or 3 servos - for more servos, go to an SBEC controller that will handle up to 6 servos.

Click here to see a range of bolts for securing your motor in your aircraft.